← Back to DiagCoach
B0060high severity✨ AI-generated

Front Driver Side Airbag Circuit/Open

The airbag circuit for the front driver side is open or shorted.

Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.

What it means (plain English)

The system that controls the front driver airbag isn’t working because of a break in the wiring or a defective part, which can prevent the airbag from deploying in a crash.

What the computer is actually seeing

The airbag control module sees a fault in the resistance or continuity of the front driver side airbag circuit, indicating an open or shorted circuit.

What a healthy reading looks like

The circuit should typically show between 2-3 ohms of resistance; anything significantly higher indicates an issue.

Guided diagnostic — the DiagCoach way

Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.

  1. 11. Start with a visual inspection of the airbag wiring and connectors under the driver seat and dash. Look for frays, cuts, or corrosion. - If damaged, repair or replace the wiring/connector. - If no damage, proceed to step 2.
  2. 22. Use a multimeter to check resistance across the airbag connector terminals. - If resistance is between 2-3 ohms, the airbag circuit is likely functioning properly. - If resistance is much higher or shows infinity, proceed to step 3.
  3. 33. Check the continuity of the cables from the airbag module to the airbag itself. - If continuity is good, replace the airbag module. - If there’s a break in continuity, repair the wiring and test again.

Common causes

  • Broken or frayed wiring harness in the driver airbag circuit.
  • Loose or corroded connectors in the airbag module.
  • Faulty airbag module itself.

Typical repair cost

$$

Related codes

Frequently asked questions

Is it safe to drive with this code active?

No, it’s not safe. The airbag won’t deploy in a crash, increasing the risk of injury.

Will this code come back if I clear it?

If the underlying issue isn’t fixed, it will likely return.

Why does this code pair with others?

Airbag systems are interconnected; a fault in one area can affect the entire system.

Working a real vehicle right now?

Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.

Start guided diagnostic →
Report