← Back to DiagCoach
B0092moderate severity✨ AI-generated

Passenger Airbag Disable Switch Circuit Failure

This code indicates a failure in the passenger airbag disable switch circuit.

Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.

What it means (plain English)

The passenger airbag disable switch is supposed to turn off the airbag when there is no passenger, but it can't, possibly due to wiring problems or a bad switch.

What the computer is actually seeing

The airbag control module detects an abnormal voltage level or a faulty signal from the passenger airbag switch. Typically, it should see the switch provide a specific voltage level, usually around 5V when active.

What a healthy reading looks like

Switch should output between 0.5V to 4.5V when toggled between enabled and disabled states.

Guided diagnostic — the DiagCoach way

Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.

  1. 11. Inspect the airbag disable switch and its wiring for visible damage.
  2. 22. Check for corrosion on the connector, clean if necessary, and ensure connections are secure.
  3. 33. Use a multimeter to measure voltage at the switch; verify it outputs 0.5V to 4.5V when toggled.
  4. 44. If voltage is out of specification, replace the airbag disable switch.
  5. 55. If voltage is okay, check the integrity of the wiring back to the airbag control module.
  6. 66. If wiring is good, perform a scan for additional codes, and consider testing the airbag control module.

Common causes

  • Faulty airbag disable switch
  • Damaged wiring or connectors
  • Corrosion in the connector
  • Faulty airbag control module

Typical repair cost

$$

Related codes

Frequently asked questions

Is it safe to drive with this code?

Yes, but the passenger airbag may not operate correctly in case of an accident.

Will this code come back after I clear it?

It can return if the underlying issue isn't fixed.

Can this code affect other safety systems?

It primarily impacts the airbag system, but related issues can affect overall safety.

Working a real vehicle right now?

Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.

Start guided diagnostic →
Report