Voltage Supply to Heated Seat Module
There's a fault in the voltage supply circuit for the heated seat module.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The heated seat module isn't getting the right voltage, which means your heated seats may not work. It's like a light bulb without electricity. Instead of getting around 12 volts, it might be getting too little or too much, causing it to malfunction.
What the computer is actually seeing
The computer monitors the voltage levels coming to the heated seat module. Normally, it expects around 12V when the system is on. If it detects less than 10V or more than 14V, it'll trigger the code B00A3.
What a healthy reading looks like
Voltage supply to the heated seat module should be between 11.8V and 14.5V while the vehicle is on and the seats are activated.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring and connectors to the heated seat module for any visible damage or corrosion. Decision Point: Is there damage? If yes, repair or replace. If no, go to step 2.
- 22. Check the fuse related to the heated seat operation. Use a multimeter to ensure it is intact. Decision Point: Is the fuse good? If no, replace the fuse and check if the code returns. If yes, proceed to step 3.
- 33. Test the voltage at the heated seat module connector. You should see between 11.8V and 14.5V with the seats turned on. Decision Point: Is the voltage within range? If no, check the wiring back to the power source. If yes, go to step 4.
- 44. If the previous steps pass, the heated seat module may be faulty and should be replaced.
Common causes
- Damaged wiring or connectors to the heated seat module
- Faulty heated seat module
- Blown fuse in the heating circuit
- Short circuit or open circuit in the power supply line
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code active?
Yes, it's safe to drive, but your heated seats won't function until fixed.
Will this code come back after clearing?
It may come back if the underlying issue isn't resolved.
Why does this code sometimes appear with other seat-related codes?
It often appears alongside other seat codes due to common circuits for power and ground distribution.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →