Driver Door Module - Configuration Error
The Driver Door Module detected a configuration mismatch.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The Driver Door Module is supposed to have certain settings to work with your vehicle's systems, like locks and windows. If this module thinks those settings are wrong, it triggers this code.
What the computer is actually seeing
The Driver Door Module receives and checks its configuration data against the vehicle's setup. If it finds a mismatch or corrupted data, it sets the B1027 code.
What a healthy reading looks like
The module should have specific calibration information and communication parameters. Typically, it expects power and ground to be stable (12V) and a proper CAN communication signal.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring and connectors to the Driver Door Module for damage or corrosion. Check for 12V power and ground at the module connector. If power is missing, locate the open circuit. Point to check: If wires are intact, proceed to step 2.
- 22. Clear the code and perform a soft reset of the system. Monitor if the code returns immediately. Decision point: If code returns, module or software is likely faulty; if it stays cleared, check for intermittent issues.
- 33. If the module is suspect, perform a bi-directional test of the Driver Door Module functions (locks, windows, etc.) through a diagnostic tool. Decision point: If functions fail, replace the Driver Door Module; if they work, check for other control module communication issues.
Common causes
- Failed Driver Door Module
- Faulty wiring to the Driver Door Module
- Corrupted software or firmware in the Driver Door Module
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
Yes, though some door functions may not work properly, it's generally safe for driving.
Will this code come back after clearing?
If the underlying issue isn't resolved, the code will likely return.
Why might this code pair with other door module codes?
Other codes indicate related issues in the door module circuit, often due to shared inputs or outputs.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →