Front Left Seat Heater Control Circuit Failure
Issue with the front left seat heater control circuit.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The control system for the heated seat in the front left seat isn't working properly, likely due to a wiring fault or a bad heater element.
What the computer is actually seeing
The seat heater module expects to see a specific resistance from the heater element and a valid voltage signal. If the resistance is too high or low, it triggers the code.
What a healthy reading looks like
Resistance of heated seat element should be between 5-10 ohms and voltage during operation should be around 12 volts.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring to the front left seat heater for any visible damage, wear, or disconnection. If found, repair it.
- 22. Check the connector at the seat heater control module for corrosion or damage. Clean or replace the connector as needed.
- 33. Measure the resistance of the seat heater element with a multimeter; it should read between 5-10 ohms. If it's out of this range, replace the element.
- 44. With the key on, measure the voltage at the seat heater control module connector. It should read around 12 volts. If no voltage, trace the circuit back for faults.
- 55. Clear the code and test the seat heater operation. If the code returns after repair, the issue may be with the heater control module itself.
Common causes
- Damaged wiring harness
- Faulty seat heater element
- Bad connector at the seat heater module
- Poor ground connection
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
Yes, but the heated seat will not function until fixed.
Will this code come back after repairs?
If repairs are done correctly and all connections are secure, the code should not return.
Why does this code pair with others?
Multiple seat heater or climate control codes can indicate a common issue in the harness or module affecting several components.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →