Steering Column Position Sensor Main Circuit Range/Performance Problem
Potential issue with the steering column position sensor's performance.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The steering column position sensor tells the computer where the steering wheel is pointing. If it's not reading correctly, the computer might think you're turning when you're not, or vice versa.
What the computer is actually seeing
The computer expects the sensor to send a voltage signal between 0.5 volts (full left) and 4.5 volts (full right) as the steering wheel is turned. If the voltage is outside this range, or if the signal is inconsistent, the fault code triggers.
What a healthy reading looks like
Normal operation voltage should be between 0.5V and 4.5V depending on the steering angle.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 1Inspect the wiring and connections going to the steering column position sensor for damage or corrosion.
- 2Check the steering column position sensor for proper voltage output while turning the steering wheel (should be between 0.5V and 4.5V).
- 3If the voltage is outside the range, replace the steering column position sensor and clear the code.
- 4If voltage is correct, inspect the steering control module and perform any necessary updates or relocations.
Common causes
- Faulty steering column position sensor
- Wiring issue or poor connection in the sensor circuit
- Damaged harness near the steering column
- Faulty steering control module
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
Yes, it's generally safe but you might experience issues with steering response or assistance.
Will this code come back after clearing it?
It may if the underlying issue isn't fixed, particularly if the sensor or wiring is faulty.
Why does this code appear with traction control issues?
The steering position sensor is crucial for stability control systems; incorrect readings can affect traction control performance.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →