Wheel Speed Sensor A Circuit Malfunction (Left Front)
Indicates an issue with the left front wheel speed sensor or its circuit.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The left front wheel speed sensor is not sending the correct information to the computer about how fast that wheel is turning. This could be due to a bad sensor or a problem with its wiring.
What the computer is actually seeing
The computer expects a steady voltage signal from the wheel speed sensor as the wheel rotates. If the sensor fails, it will see a drop or no signal (0 volts) where it should see 0.5-2.5 volts depending on speed.
What a healthy reading looks like
0.5 to 2.5 volts when wheel is turning, 0 volts when stationary or if sensor is faulty.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring and connector to the left front wheel speed sensor for damage or corrosion. If damaged, repair or replace as needed.
- 22. Check the sensor output: unplug the wheel speed sensor and connect a multimeter to the harness side. Spin the wheel and check for voltage output. Expect 0.5 to 2.5 volts. If no voltage, replace the sensor.
- 33. If the sensor is fine, check the ABS module for DTCs or blown fuses. Look for physical damage to the module. Swap with a known good module if available to eliminate.
- 44. Clear the fault codes, perform a road test, and see if the code returns. If it does, further investigation into the ABS system may be necessary.
Common causes
- Faulty left front wheel speed sensor
- Damaged wiring or connectors
- Corrosion at sensor connectors
- Bad ABS module
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive if this code is active?
It's not recommended to drive with this code as it can affect ABS and traction control performance.
Will this code come back after clearing it?
If the underlying issue isn't fixed, yes, the code will likely return.
Why does this code sometimes appear with other sensor codes?
Faulty wheel speed sensors can affect multiple systems, leading to multiple codes being stored related to vehicle speed and traction.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →