Steering Angle Sensor Calibration Error
There’s an issue with the steering angle sensor calibration.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The steering angle sensor measures the angle of the steering wheel. If it can't tell where the wheel is positioned, it can cause problems with traction control and stability systems.
What the computer is actually seeing
The computer expects a valid angle signal from the steering angle sensor in volts, typically ranging between 0.5V to 4.5V based on the steering wheel's position. If the reading is out of this range or not updating as expected, it triggers a fault.
What a healthy reading looks like
Steering angle sensor voltage should be between 0.5V (full left) and 4.5V (full right).
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the steering angle sensor wiring and connectors for damage or corrosion. Fix any issues found.
- 22. Check for other DTCs that may affect the steering system. Address those first before continuing.
- 33. Using a scan tool, monitor the steering angle sensor voltage while turning the steering wheel. Ensure it moves smoothly from 0.5V to 4.5V. If not, replace the sensor.
- 44. If the sensor voltage is correct, check the calibration status. If it’s out of calibration, recalibrate using scan tool procedures.
Common causes
- Faulty steering angle sensor
- Wiring issues or connector corrosion
- Faulty steering rack or module
- Improperly calibrated or installed sensor
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's drivable but you may experience reduced traction control or stability, so be cautious.
Will this code come back after clearing it?
If the underlying issue isn't fixed, yes, it will likely return.
Why might this code pair with C0275?
C0275 indicates a similar issue with the sensor reading, suggesting an overall fault in the steering angle system.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →