Brake Pressure Sensor Circuit Range/Performance Problem
There’s an issue with the brake pressure sensor's signal range or performance.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The brake pressure sensor is supposed to measure how hard you’re pushing on the brake pedal, but it’s sending a signal that’s outside of what the computer expects, either too high or too low.
What the computer is actually seeing
The engine control unit (ECU) expects the brake pressure sensor to output a voltage between 0.5V and 4.5V corresponding to brake pressure, depending on how hard you press the pedal.
What a healthy reading looks like
Brake pressure sensor output should be around 0.5V with no pressure and up to 4.5V with full brake pressure applied.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 1Check the brake fluid level in the reservoir.
- 2Inspect the wiring and connectors going to the brake pressure sensor for damage, corrosion, or loose connections.
- 3Using a multimeter, test the voltage at the brake pressure sensor connector; it should read between 0.5V and 4.5V. If it’s out of this range, continue troubleshooting.
- 4Test the brake pressure sensor by applying known pressures; ensure it outputs corresponding voltages (0.5V at no pressure, up to 4.5V fully depressed).
- 5If the sensor checks out, verify the hydraulic system (including the master cylinder) for leaks or malfunctions.
Common causes
- Faulty brake pressure sensor
- Damaged wiring or connectors
- Hydraulic system leak affecting pressure
- Faulty master cylinder
- Software issue in the ECU
Typical repair cost
$$$
Related codes
Frequently asked questions
Can I still drive the vehicle with this code?
Yes, but braking performance may be affected; it's best to fix this sooner rather than later.
Will this code come back after I clear it?
If the underlying issue isn’t fixed, the code is likely to return.
Why might this code show up alongside a transmission code?
The brake pressure sensor is often linked to vehicle systems; issues here can affect how the transmission shifts.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →