Left Front Wheel Speed Sensor Circuit Range/Performance Problem
There's an issue with the left front wheel speed sensor signal.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The left front wheel speed sensor isn't sending a reliable signal to the computer, affecting traction control and ABS.
What the computer is actually seeing
The ABS module detects that the voltage from the left front wheel speed sensor is outside of the expected range, which should typically be between 0.5V and 2.5V when the wheel is turning.
What a healthy reading looks like
During normal operation, the left front wheel speed sensor should produce a signal frequency correlating with wheel speed, usually from 0-1000 Hz depending on speed.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the left front wheel speed sensor and wiring for any physical damage or disconnection. If found, repair or replace as needed.
- 22. Check the connector at the wheel speed sensor for corrosion or loose connections. Ensure it's securely plugged in.
- 33. Using a scan tool, monitor the wheel speed sensor signal while driving. Look for consistent readings that align with vehicle speed.
- 44. If the sensor reading remains erratic or out of range, disconnect the sensor and check resistance with a multimeter; you should see resistance near 1,000 to 1,500 ohms. If resistance is outside this range, replace the sensor.
- 55. Clear the code and take the vehicle for a test drive to verify if the fault reappears.
Common causes
- Damaged wheel speed sensor
- Faulty wiring or connector
- Corroded connections
- Malfunctioning ABS module
- Debris on the sensor
Typical repair cost
$$
Related codes
Frequently asked questions
Can I drive the vehicle with this code?
Yes, but you may lose ABS and traction control functionality, which can affect safety.
Will this code come back after clearing it?
If it returns, further diagnosis is needed.
Why does this code sometimes pair with C0035?
C0035 indicates a problem with the right front sensor, often due to similar issues like wiring faults or ABS module failure.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →