Brake Pressure Sensor Circuit Fault
Problem detected in the brake pressure sensor circuit.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The brake pressure sensor monitors how much force is applied to the brake pedal; an issue here means the system can't track braking performance accurately.
What the computer is actually seeing
The brake control module expects a voltage signal between 0.5 to 4.5 volts based on pressure applied but sees an out-of-range value, a short to ground, or an open circuit.
What a healthy reading looks like
Brake pressure should read between 0.5 volts (no pressure) and 4.5 volts (full pressure) during operation.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect wiring and connectors for damage or corrosion. Repair as needed. Decision: Is wiring/connectors good? Yes: Go to step 2; No: Repair/retest.
- 22. Check the voltage at the brake pressure sensor connector while applying the brake. Decision: Is the voltage between 0.5 and 4.5 volts? Yes: Go to step 3; No: Replace the sensor or repair the circuit as necessary.
- 33. Perform a sensor calibration if applicable. Decision: Does the code clear? Yes: Repair complete; No: Inspect brake control module and connections.
Common causes
- Damaged wiring or connectors in the brake pressure sensor circuit
- Faulty brake pressure sensor
- Corrosion in connectors
Typical repair cost
$$
Related codes
Frequently asked questions
Can I still drive the vehicle?
Yes, but braking performance may be impacted. Fix this soon.
Will the code come back after resetting?
It may, especially if the underlying issue isn't resolved.
What happens if I ignore this code?
You risk reduced braking performance which can be unsafe.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →