Steering Angle Sensor Input Circuit Malfunction
The steering angle sensor circuit has a fault that affects vehicle stability control.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The steering angle sensor helps the computer know how much you're turning the wheel. This code means there's a problem with that sensor or its wiring.
What the computer is actually seeing
The vehicle's computer expects a variable voltage signal from the steering angle sensor, typically between 0.5V and 4.5V, depending on the angle of the steering wheel.
What a healthy reading looks like
0.5V (full left) to 2.5V (center) to 4.5V (full right) depending on steering position.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check the vehicle’s steering angle sensor wiring and connectors for damage or corrosion. Decide: is the wiring intact? If no, repair or replace as needed.
- 22. Measure the voltage at the steering angle sensor connector with the ignition on and the steering wheel in the center position. Expected value is around 2.5V. Decide: is the voltage within expected range? If no, replace the sensor.
- 33. If the sensor voltage is okay, check the sensor output while turning the steering wheel. The voltage should smoothly transition between 0.5V and 4.5V. Decide: does the voltage change correctly? If no, replace the steering angle sensor.
- 44. If all previous checks are okay, consider scanning for other codes and performing a vehicle stability control module reset.
Common causes
- Faulty steering angle sensor
- Wiring issues or loose connections
- Corrosion in connectors
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's safe to drive, but be cautious of vehicle stability and handling, as some stability features may be disabled.
Will this code come back after I clear it?
If the underlying issue is not fixed, yes, it will likely come back.
Why am I seeing this code along with C0518?
C0518 is often related to steering angle sensor issues, indicating a common malfunction in the sensor circuit.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →