Steering Wheel Position Sensor Performance
Indicates a problem with the steering wheel position sensor.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The steering wheel position sensor is sending incorrect information about the angle of the steering wheel to the vehicle's computer, which can affect steering and stability control.
What the computer is actually seeing
The computer expects to see specific voltage signals from the steering wheel position sensor that reflects its current angle. If these signals are outside of expected ranges, the computer will flag this code.
What a healthy reading looks like
Voltage signal from the sensor should range between 0.5V to 4.5V depending on the angle.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring and connector at the steering wheel position sensor for damage or corrosion. Repair any issues found.
- 22. Measure the voltage output of the steering wheel position sensor with a multimeter. Expected output is between 0.5V and 4.5V depending on the steering angle. If out of range, go to step 3.
- 33. Check the sensor's ground connection. You should see close to 0V; if not, repair any ground issues.
- 44. If the voltage is correct and the ground is good, calibrate the steering wheel position sensor according to the vehicle manufacturer's procedure. Test drive and check for code.
- 55. If code persists, replace the steering wheel position sensor.
Common causes
- Faulty steering wheel position sensor
- Wiring issues (frayed or shorted wires)
- Connector problems (corrosion or loose connection)
- Calibration issues after replacing the sensor
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
Moderate; it may affect steering control, so it's best to fix it soon.
Will the code come back after clearing it?
If the underlying issue isn't fixed, the code is likely to return.
Why does this code appear with other codes?
This code often pairs with others related to steering and stability control, indicating a common fault in those systems.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →