← Back to DiagCoach
C0732moderate severity✨ AI-generated

Wheel Speed Sensor 2 Circuit Range/Performance Problem

This code indicates an issue with the performance or range of the second wheel speed sensor.

Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.

What it means (plain English)

The second wheel speed sensor is having problems reading the speed of the wheel accurately, which could be due to wiring issues or a faulty sensor.

What the computer is actually seeing

The ABS module monitors the voltage signal from the wheel speed sensor. It expects a specific voltage range that varies based on speed; if the voltage is too low or too high compared to the baseline reading, it triggers the C0732 code.

What a healthy reading looks like

The wheel speed sensor should send a signal voltage between 0.5V to 4.5V depending on the wheel speed; a steady voltage at rest should be around 0.5V to 1.5V.

Guided diagnostic — the DiagCoach way

Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.

  1. 1Check the wiring and connectors for the second wheel speed sensor for damage and corrosion.
  2. 2Measure the voltage at the sensor connector: it should be within 0.5V to 4.5V while spinning the wheel. If it’s outside this range, replace the sensor.
  3. 3Inspect the wheel bearing and hub assembly for any mechanical issues that might affect the sensor reading.

Common causes

  • Faulty wheel speed sensor
  • Damaged wiring or connectors
  • Corrosion in connector terminals
  • Issues with wheel bearing assembly

Typical repair cost

$$

Related codes

Frequently asked questions

Is it safe to drive with this code present?

It's generally safe to drive, but you may experience traction control or ABS issues.

Will the code come back after clearing?

If the underlying issue isn’t fixed, yes, the code will likely return.

Why does this code sometimes appear with C0730?

C0730 indicates a similar issue; both codes point to problems with wheel speed sensors.

Working a real vehicle right now?

Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.

Start guided diagnostic →
Report