Wheel Speed Sensor Circuit Failure
There's a problem with the wheel speed sensor circuit.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The wheel speed sensor is supposed to send a signal about how fast the wheel is turning. If the circuit is broken or if the sensor is malfunctioning, the computer can't get the right information to control systems like ABS or traction control.
What the computer is actually seeing
The computer expects a variable voltage signal (typically 0.5V to 5V) from the wheel speed sensor as the wheel rotates. If no signal or an incorrect signal is received, it triggers this code.
What a healthy reading looks like
A normal wheel speed sensor should output a voltage between 0.5V and 5V depending on wheel speed; at standstill, the value should be near 0V.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect wheel speed sensor wiring and connectors for visible damage, corrosion, or disconnection. If damaged, repair or replace as necessary. Decision: No damage? Go to step 2.
- 22. Measure voltage at the wheel speed sensor connector with ignition on but engine off. Expect around 5V for power supply. Decision: Voltage present? Go to step 3. No voltage? Check fuses and wiring to the computer.
- 33. Use a multimeter to check the resistance of the wheel speed sensor. Expected value is typically between 1000-2000 ohms. Decision: Within range? Go to step 4. Out of range? Replace the sensor.
- 44. With the vehicle in motion, measure the output voltage from the wheel speed sensor. It should vary between 0.5V to 5V. Decision: Output normal? If yes, check the ABS module for related faults. If no, replace the sensor.
Common causes
- Broken wire or connector issue in the wheel speed sensor circuit
- Faulty wheel speed sensor
- Interference from metal shavings or debris on sensor
- Loss of power or ground to the sensor
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with C0814?
It's best to fix this code soon as it affects your ABS and traction control systems, which are important for safe driving.
Will this code come back after clearing?
If the underlying issue isn't resolved, the code will likely return after clearing.
Why does this code often correlate with others?
When one wheel speed sensor fails, it can cause issues across multiple systems, often triggering related codes.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →