Wheel Speed Sensor Circuit Malfunction
There's a problem with the wheel speed sensor circuit.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The wheel speed sensor tells the computer how fast each wheel is turning. If there's a problem with this sensor or its wiring, the computer can’t get the correct speed information, which might affect systems like ABS or traction control.
What the computer is actually seeing
The computer monitors the wheel speed sensor signals, expecting to see consistent voltage levels or frequency based on wheel rotation. If it detects intermittent signals or no signal at all, it sets this code.
What a healthy reading looks like
The wheel speed sensor typically outputs between 0.5V to 5V, depending on the speed. At rest, you should see around 0V, and while moving, it should vary as the speed increases.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring and connectors at the wheel speed sensor for damage, corrosion, or loose connections. Repair as needed. Decision Point: Are the connections clean and tight? (Yes/No)
- 22. Check the output voltage from the wheel speed sensor using a multimeter while the vehicle is being driven. Expected range is 0.5V to 5V while moving. Decision Point: Is the voltage within expected values? (Yes/No)
- 33. If voltage is not within range, swap the wheel speed sensor with a known good sensor. Decision Point: Does the code persist after the swap? (Yes/No)
- 44. If the code returns, check the ABS module for faults or issues. Connect a scanner and review any additional codes related to the ABS system.
Common causes
- Damaged wheel speed sensor
- Broken or corroded wiring
- Faulty wheel bearing
- Poor connector condition
- ABS module failure
Typical repair cost
$$
Related codes
Frequently asked questions
Can I drive my vehicle safely with this code?
Yes, but be cautious. You may lose ABS and traction control, which can affect braking performance in slippery conditions.
Will this code come back after clearing?
If the underlying issue is not fixed, the code will likely return after some driving.
Why does this code seem to pair with other ABS codes?
Because the wheel speed sensor is integral to the ABS system's functionality, issues with it can trigger other related fault codes.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →