Left Front Wheel Speed Sensor Circuit Range/Performance Problem
Wheel speed sensor issue in the left front wheel.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The computer checks the speed of each wheel using sensors. If the left front sensor is giving readings that are too low or too high, it throws this code. This is often due to dirty sensors or faulty wiring.
What the computer is actually seeing
The ABS control module monitors the voltage signal from the left front wheel speed sensor. It expects to see a fluctuating voltage based on wheel speed, usually around 0-5 volts depending on the wheel's speed. If the readings don't match expected patterns, the code gets triggered.
What a healthy reading looks like
The wheel speed sensor should produce a voltage signal between 0.5 and 4.5 volts as the wheel turns. A stationary sensor should read close to 0 volts.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring and connectors to the left front wheel speed sensor for damage and ensure they are connected securely. Decision: Are there any visible issues? Yes - repair them; if not, proceed to step 2.
- 22. Check the sensor's resistance with a multimeter. You should see a value typically between 1,000 and 2,000 ohms. Decision: Is the resistance within spec? No - replace the sensor; if yes, proceed to step 3.
- 33. Monitor the voltage signal from the sensor while the vehicle is in motion. You should see a fluctuating voltage signal. Decision: Is the signal fluctuating as expected? No - repair or replace the sensor; if yes, consider the ABS module.
Common causes
- Faulty left front wheel speed sensor
- Damaged wiring or connectors to the sensor
- Brake rotor not spinning freely (due to binding)
- Faulty ABS module
- Intermittent electrical connections
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's not recommended. You'll experience issues with ABS and potential traction control problems, which can affect safety.
Will this code come back after clearing?
It might, especially if the underlying problem isn't fixed. Monitor the issue after repairs.
Why does this error code appear with brake-related issues?
Because the wheel speed sensors directly affect ABS and traction control systems, any malfunction can trigger faults.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →