Wheel Speed Sensor Range/Performance Problem
There’s an issue with the wheel speed sensor's performance or range.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The wheel speed sensor detects how fast each wheel is spinning. If it can’t get a clear reading, it triggers this code, which usually means a wiring issue or a faulty sensor.
What the computer is actually seeing
The ABS module expects the wheel speed sensor to send voltage signals typically between 0.5V to 2.5V when the wheel is stationary to 12V under movement. If the signal is out of this range or missing, it sets C1068.
What a healthy reading looks like
Wheel speed sensors should output between 0.5V (stationary) to about 12V (maximum speed).
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect wiring and connectors at the wheel speed sensor for damage or corrosion. Repair as needed. Decision: If damaged, fix it and retest. If not, proceed to step 2.
- 22. Measure the voltage output of the wheel speed sensor with a multimeter while a technician spins the wheel manually. Expected range: 0.5V to 12V. Decision: If output is within range, go to step 3; if out of range, replace the wheel speed sensor.
- 33. Check for any additional codes in the ABS system. Clear codes and perform a road test. If C1068 reappears, inspect the ABS control module. Decision: If C1068 returns, consider replacing the ABS control module as the final step.
Common causes
- Wiring harness damage or corrosion
- Faulty wheel speed sensor
- Poor connector connection or water ingress
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code active?
You can drive, but be aware that ABS functionality may be compromised. Fix it soon to maintain safety.
Will the code come back after clearing it?
If the underlying issue isn’t resolved, the code is likely to return after driving for some time.
Why does this code show up with other codes?
C1068 often appears alongside other wheel speed sensor or ABS codes, indicating an overall issue with the wheel speed sensor circuit or ABS system.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →