ABS Wheel Speed Sensor Front Right Circuit Range/Performance Problem
There's an issue with the front right wheel speed sensor or its circuit.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The front right wheel speed sensor is having trouble sending the right signals to the ABS system, which helps with braking and stability.
What the computer is actually seeing
The ABS control module monitors the wheel speed sensors to identify the speed of each wheel, expecting a consistent voltage signal (typically around 0-5V) that rises and falls in relation to the wheel speed. If the readings are erratic or outside of expected ranges, it triggers the C1125 code.
What a healthy reading looks like
Normal wheel speed sensor output should vary from 0V (stationary) to approximately 5V (at max speed), with consistent fluctuation as the vehicle moves.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the front right wheel speed sensor wiring and connector for visible damage or corrosion. If found, repair/replace as necessary. Decision point: If wiring looks good, proceed to step 2.
- 22. Check the resistance of the front right wheel speed sensor. Expected resistance is typically between 1,000 to 2,500 ohms. Decision point: If resistance is out of range, replace the sensor. If within range, proceed to step 3.
- 33. Use a scan tool to monitor the wheel speed sensor data while the vehicle is moving. Look for consistent voltage output. Decision point: If output is erratic, replace the sensor; if stable, check ABS module.
Common causes
- Damaged wheel speed sensor wiring
- Faulty front right wheel speed sensor
- Corroded connector at the sensor
- Mechanical failure at the wheel bearing affecting sensor alignment
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code present?
It's moderate severity; vehicle may experience reduced braking performance. Drive with caution and fix soon.
Will this issue come back after repair?
If the sensor or wiring is properly fixed, it should not return unless there is a new issue.
Why is this code paired with other codes?
Other ABS codes may indicate similar or related issues with different sensors or circuits, affecting overall system performance.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →