Wheel Speed Sensor Circuit Failure (Right Front)
The right front wheel speed sensor is reporting incorrect or no signal.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The right front wheel speed sensor is either broken or not sending any signal to the computer, which can affect how the ABS and traction control systems work.
What the computer is actually seeing
The computer expects to get a varying voltage signal from the right front wheel speed sensor that reflects the wheel's speed. If the sensor fails, it may detect a constant voltage (0V) or faulty resistance rather than a changing signal.
What a healthy reading looks like
The right front wheel speed sensor should produce a voltage signal between 0.5 to 5 volts while the wheel is rotating, varying in response to speed.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring and connectors to the right front wheel speed sensor for any visible damage or corrosion. If damaged, repair or replace as necessary. Decision: If wiring/connector is intact, move to step 2. If damaged, fix and retest.
- 22. Measure the voltage at the wheel speed sensor while the vehicle is in motion. Expected voltage is between 0.5 to 5 volts. Decision: If readings are within range, the sensor may be faulty; replace it. If readings are out of range or at 0V, proceed to step 3.
- 33. Check the resistance of the wheel speed sensor. It should be between 1-2 kOhms. If the resistance is out of range, replace the sensor. Decision: If resistance is acceptable, check the ABS control module.
Common causes
- Corroded or damaged wiring
- Faulty wheel speed sensor
- Connector issues or bad grounds
- ABS control module malfunction
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with code C1172 active?
It's technically drivable but be cautious; ABS and traction control systems may not function correctly, increasing risk in slippery conditions.
Will this code come back after clearing?
If the issue isn't fixed, yes, it will likely return after a short drive.
What if I get codes for multiple wheel speed sensors?
Check the wiring and connectors first; a common problem could be a bad ground or power issue affecting all sensors.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →