← Back to DiagCoach
C117Emoderate severity✨ AI-generated

Wheel Speed Sensor Signal A

Wheel speed sensor A signal is out of range or not present.

Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.

What it means (plain English)

The system is not getting the expected signal from the wheel speed sensor A, indicating there may be an issue with the sensor or wiring.

What the computer is actually seeing

The computer expects a voltage signal from the wheel speed sensor A that varies with wheel speed. Normally, this signal voltage should fluctuate between 0.5V to 3.5V depending on wheel movement.

What a healthy reading looks like

Voltage signal from wheel speed sensor A should be between 0.5V and 3.5V, changing as the vehicle moves.

Guided diagnostic — the DiagCoach way

Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.

  1. 1Check for visible wiring damage or corrosion at the wheel speed sensor connector.
  2. 2Test the voltage at the wheel speed sensor with the ignition on (engine off). Expected value is between 0.5V and 3.5V. If outside this range, go to step 3.
  3. 3Inspect the wheel speed sensor itself for damage. Replace if faulty and recheck.
  4. 4Verify the grounding circuit is good—measure resistance to ground. Should be less than 5 ohms.
  5. 5If all checks are OK, consider the possibility of an issue with the ABS module.

Common causes

  • Damaged or corroded wiring or connector at the wheel speed sensor
  • Faulty wheel speed sensor
  • Poor grounding of the sensor circuit

Typical repair cost

$$

Related codes

Frequently asked questions

Is it safe to drive with this code?

Moderate severity means it’s best to fix it soon due to potential impact on ABS and stability control.

Will this code come back after clearing?

If the underlying issue isn't resolved (like a bad sensor or wiring), yes, it will return.

Why does this code pair with others?

Multiple faults can occur in the same system; wheel speed sensors are critical for traction and stability systems.

Working a real vehicle right now?

Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.

Start guided diagnostic →
Report