Traction Control Disabled
Traction control system has been disabled due to a fault.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The traction control is turned off because the system detected a problem, likely related to wheel speed sensors or the control module itself.
What the computer is actually seeing
The vehicle's stability control system is monitoring the wheel speed sensors and finds inconsistencies or failures, stopping the traction control from activating.
What a healthy reading looks like
Wheel speed sensors should show readings between 0-20 mph during motion; any drastic drop or consistent zero can trigger this code.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check for any wiring/connector issues at the wheel speed sensors. Repair if damaged.
- 22. With the scanner, check the live data of the wheel speed sensors. Confirm all sensors read correctly while driving (0-20 mph).
- 33. If wheel speed sensors are faulty, replace them and clear the code. If no readings or inconsistent readings persist, jump to step 4.
- 44. Inspect the ABS control module connections and wiring. Look for corrosion or loose connections. Repair as needed.
- 55. If all wiring and sensors are good but the code returns, you may need to replace the ABS control module.
Common causes
- Faulty wheel speed sensors
- Wiring issues to speed sensors
- Control module failure
- Bad ABS module
Typical repair cost
$$-$$$
Related codes
Frequently asked questions
Is it safe to drive with this code active?
Yes, but be aware that traction control is disabled, which can affect handling in slippery conditions.
Will this code come back after repairs?
If the underlying issue is properly fixed, the code should not return.
Why does this code pair with C1385?
Both codes can indicate problems related to the traction control system or ABS module, often stemming from similar issues.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →