Injector Circuit Range/Performance Problem (Cylinder 5)
There’s an issue with the fuel injector circuit for cylinder 5.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The computer is getting a signal that the fuel injector for cylinder 5 isn't working right. This could be because the injector's resistance is too high, the wiring is damaged, or there's a problem with the injector itself.
What the computer is actually seeing
The Engine Control Unit (ECU) checks the resistance of the injector circuit and monitors the voltage and current delivered to the injector. If the readings deviate from normal operating parameters, a code triggers.
What a healthy reading looks like
The injector should have a resistance between 12 to 16 ohms, and the voltage should be around 12 volts when activated.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 1Check wiring and connectors for cylinder 5 injector; fix any issues found.
- 2Measure the resistance of the injector; it should be between 12 to 16 ohms. If it's out of range, replace the injector.
- 3Check the voltage at the injector connector while cranking the engine. Should see around 12 volts. If not, check the wiring and ECU output.
- 4If everything is good, inspect the fuel system for proper fuel delivery and pressure, as low fuel pressure can affect injector performance.
Common causes
- Faulty fuel injector for cylinder 5
- Open or shorted wiring in the injector circuit
- Corroded or loose connector at the injector
- Failed ECU controlling the injector
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's best not to drive it long-term. While you might still drive it short distances, poor performance can lead to more damage.
Will the code come back after clearing it?
If the underlying issue isn’t fixed, the code will likely return after a short period of operation.
Why does this code only affect cylinder 5?
Each cylinder has its own injector that operates independently, so a problem can be localized to one cylinder without affecting the others.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →