Secondary Air Injection System Switching Valve A Circuit Malfunction
There's a problem with the secondary air injection system's valve A circuit.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The secondary air injection system helps reduce emissions by pumping extra air into the exhaust to promote cleaner combustion. If the valve that controls this air intake is faulty or has an electrical issue, it won't work properly, which might lead to increased emissions.
What the computer is actually seeing
The engine control module (ECM) monitors the voltage and resistance in the secondary air injection system's switching valve circuit. If it detects out-of-spec values, like a voltage drop below 0.1V or above 4.5V during operation, it triggers this code.
What a healthy reading looks like
Expected voltages for the valve circuit should be between 0.5V and 3.5V while the engine is running; resistance should be between 2 to 6 ohms when measured across the valve terminals.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check for any blown fuses related to the secondary air injection system. If a fuse is blown, replace and recheck for codes.
- 22. Inspect the wiring and connectors at the secondary air injection valve for corrosion, shorts, or breaks. Repair any issues found, then recheck for codes.
- 33. Use a multimeter to measure voltage at the valve connector with the engine running. It should read between 0.5V and 3.5V. If outside this range, repair the wiring or check the ECM.
- 44. Test the resistance of the secondary air injection valve. Disconnect the valve and measure resistance across its terminals; it should be between 2 to 6 ohms. If it’s not in this range, replace the valve.
Common causes
- Faulty secondary air injection valve
- Wiring harness issues or shorts
- ECM failure
- Blown fuse in the air injection system
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
You can drive the vehicle, but avoid long trips or heavy loads as it may increase emissions and reduce fuel efficiency.
Will this code come back after clearing it?
It could return if the underlying issue isn't fixed; make sure to follow the guided diagnostics.
Why does this code not pair with others?
This specific code directly indicates an issue with the circuit of the secondary air injection valve and may not trigger others unless multiple faults are present.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →