Engine Oil Pressure Sensor/Switch Circuit
Indicates an issue with the engine oil pressure sensor or its circuit.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The engine oil pressure sensor measures how much pressure the oil pump is generating to lubricate the engine. If it’s too low or the sensor fails, it sends a signal to the computer that something’s wrong.
What the computer is actually seeing
The engine computer monitors the voltage signal from the oil pressure sensor, typically between 0.5V to 4.5V. Low or high voltages outside this range trigger the code.
What a healthy reading looks like
Normal engine oil pressure during idle should be between 10-20 PSI, increasing with RPMs, typically reaching 40-60 PSI at operating speed.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 1Check engine oil level; it must be at proper operating level.
- 2Inspect wiring harness and connectors for damage or corrosion; repair as needed.
- 3Use a scan tool to read oil pressure values and compare them with a mechanical gauge.
- 4If the gauge reading is correct but the code persists, replace the oil pressure sensor.
Common causes
- Faulty oil pressure sensor
- Wiring issues or poor connections
- Low engine oil levels
- Faulty oil pump
- Oil sludge restricting flow
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's not recommended to drive long distances as low oil pressure can lead to engine damage.
Will the problem come back after clearing the code?
If the underlying issue isn't fixed, the code will likely return.
Why does this code sometimes pair with other codes?
Issues in the oil pressure system can cause multiple symptoms leading to additional fault codes.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →