Transmission Fluid Pressure Sensor Range/Performance Problem
The transmission fluid pressure sensor is reading out of expected range.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The computer is seeing a transmission fluid pressure that doesn't match what it should be based on the current conditions, which can lead to shifting problems.
What the computer is actually seeing
The transmission control module expects the fluid pressure to fluctuate within a specific range during operation, usually between 40-70 psi at operating temperature.
What a healthy reading looks like
Transmission fluid pressure should be between 40-70 psi when the transmission is at operating temperature, which is typically around 175-200°F.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check the transmission fluid level. Make sure it's full and clean. If low, add fluid and see if the code persists.
- 22. Inspect wiring and connectors to the transmission fluid pressure sensor for damage, corrosion, or loose connections. Repair as necessary.
- 33. Test the transmission fluid pressure sensor with a multimeter. Compare the readings to expected values; replace if faulty.
- 44. Clear the code and road test the vehicle under typical conditions. Monitor for reoccurrence of the code.
Common causes
- Faulty transmission fluid pressure sensor
- Wiring issues (shorts, opens, or bad grounds)
- Low transmission fluid level or dirty fluid
- Faulty transmission control module (TCM)
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's not recommended; it can lead to rough shifting or transmission damage.
Will this code come back after clearing it?
If the underlying issue isn't fixed, yes, it will likely return.
Can low fluid levels cause this code?
Yes, low fluid levels can cause incorrect pressure readings, triggering this code.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →