Transmission Shift Solenoid A Performance
Shift solenoid A isn't working correctly during transmission operation.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The transmission uses a solenoid to control how gears shift, and if it malfunctions, the car might shift hard or not at all.
What the computer is actually seeing
The engine control module (ECM) monitors input from the transmission control module (TCM) regarding the operation of shift solenoid A. If it detects a persistent condition where the solenoid is stuck open or closed, it triggers this code.
What a healthy reading looks like
0-12 volts at the solenoid connector when commanded. Resistance should be between 11-13 ohms for proper operation.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 1Inspect the transmission fluid level and condition. Refill or replace if low or dirty.
- 2Check wiring and connectors to shift solenoid A for damage or corrosion. Repair as needed.
- 3Using a multimeter, test the resistance of shift solenoid A; it should be between 11-13 ohms. If it's outside this range, replace the solenoid.
- 4With the vehicle in gear, measure voltage at the solenoid connector with the engine running. It should be 0-12 volts depending on the gear. If not, the TCM might be at fault.
Common causes
- Faulty shift solenoid A
- Damaged wiring or connectors to the solenoid
- Low transmission fluid levels or contaminated fluid
- Faulty transmission control module (TCM)
Typical repair cost
$$-$$$
Related codes
Frequently asked questions
Is it safe to drive with this code active?
It's best to avoid driving until the issue is resolved, as it can lead to transmission damage.
Will the code return after clearing it?
If the problem isn't fixed, yes, the code will likely return after driving for a short time.
Why does this code relate to shifting problems?
Because shift solenoid A controls the engagement and disengagement of gears, any malfunction directly affects shifting performance.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →