Clutch Position Sensor Circuit Range/Performance Problem
The clutch position sensor is out of range or not working properly.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The computer monitors the clutch position to know when the clutch is engaged or disengaged. If the sensor gives readings that are too high or low, the computer can’t tell if the clutch is working right.
What the computer is actually seeing
The computer expects a voltage reading from the clutch position sensor that should change from about 0.5 volts (clutch engaged) to around 4.5 volts (clutch disengaged).
What a healthy reading looks like
0.5 - 4.5 volts from clutch position sensor during normal operation.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring and connections to the clutch position sensor for damage or corrosion.
- 22. Use a multimeter to measure voltage at the clutch position sensor connector. It should change when the clutch is pressed and released. If it's stuck around one voltage, suspect a failed sensor.
- 33. If the sensor appears bad, unplug it, and test the resistance from the harness to ground. Expected resistance should be below 1 ohm if wiring is good.
- 44. If wiring is good but the sensor is still faulty, replace the clutch position sensor and retest.
- 55. Clear the code and test drive the vehicle. If the code returns, further diagnosis of the TCM or PCM may be required.
Common causes
- Faulty clutch position sensor
- Wiring issues or bad connections
- Faulty clutch pedal assembly
- Software issue in the TCM (Transmission Control Module)
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's best to address this code soon as it may cause shifting issues, but you may still be able to drive under moderate conditions.
Will this code come back after reset?
If the underlying issue isn’t fixed, the code will likely return.
Why does this code pair with transmission issues?
The clutch position sensor directly affects how the transmission shifts; incorrect readings can cause harsh shifts or slipping.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →