Engine Oil Pressure
Engine oil pressure is low or out of range.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The engine isn’t getting enough oil pressure, which can cause severe damage if not fixed immediately.
What the computer is actually seeing
The Engine Control Module (ECM) monitors the oil pressure sensor input, which should typically read between 40-60 psi during normal operation.
What a healthy reading looks like
40-60 psi under normal operating conditions; below 25 psi may trigger a fault.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check the engine oil level. Add oil if low. Decision: Is oil level okay? If yes, go to step 2. If no, fill oil and retest.
Common causes
- Low oil level
- Oil pump failure
- Clogged oil filter
- Faulty oil pressure sensor
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
No, you risk engine damage. Address this immediately.
Will this code come back after reset?
Yes, if the underlying issue isn't fixed, it will reappear.
What else could affect oil pressure?
Oil viscosity, pump wear, or a faulty gauge can affect readings.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →