Fuel Pressure Sensor Circuit Low
The fuel pressure sensor signal is lower than expected.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The fuel pressure sensor is detecting that the fuel system isn’t generating enough pressure, which can lead to performance issues.
What the computer is actually seeing
The computer monitors the fuel pressure sensor signal, expecting a voltage between 0.5V to 5V corresponding to 10-120 psi. If it drops below 0.5V for more than 2 seconds, it triggers SPN 0193.
What a healthy reading looks like
Expected voltage from the fuel pressure sensor is 0.5V to 5V, indicating fuel pressure from 10 psi to 120 psi.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Perform a visual inspection of the fuel pressure sensor wiring and connector for damage or corrosion. Decision Point: Is the wiring intact? If yes, proceed to step 2. If no, repair the wiring and retest.
- 22. With the ignition on (engine off), measure the voltage at the fuel pressure sensor connector. You should see between 0.5V to 5V. Decision Point: Is the voltage in this range? If yes, proceed to step 3. If no, replace the fuel pressure sensor and retest.
- 33. Start the engine and monitor fuel pressure using a gauge connected to the fuel rail. Expected values should align with the sensor reading. Decision Point: Is the fuel pressure within specifications? If yes, the issue is resolved. If no, check the fuel pump and filter.
Common causes
- Failed fuel pressure sensor
- Wiring issues (short to ground or open circuit)
- Fuel pump failure
- Clogged fuel filter
- Low fuel level or contamination
Typical repair cost
$$-$$$
Related codes
Frequently asked questions
Can I drive with this code?
It’s best to address this issue soon since low fuel pressure can cause poor engine performance.
Will this code come back after I clear it?
If the underlying issue isn't fixed, such as a bad sensor or fuel pump, the code will likely return.
Why do I see this code with other fuel system codes?
Multiple fuel system issues can arise simultaneously, often related to the same underlying problem like a failing pump.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →