Fuel Pressure Sensor Circuit Low
Indicates a low voltage from the fuel pressure sensor.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The fuel pressure sensor is sending a voltage reading that’s lower than it should be, which might mean there’s a problem with the fuel system, like not enough pressure for the engine to run efficiently. It should be around 0.5 to 4.5 volts, depending on the pressure.
What the computer is actually seeing
The onboard computer monitors the fuel pressure sensor, expecting a voltage signal that correlates to actual fuel pressure. If it receives a signal below the expected threshold, it triggers the fault code.
What a healthy reading looks like
The fuel pressure sensor should output a voltage between 0.5 and 4.5 volts when the engine is running under normal conditions.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check the fuel pressure sensor wiring and connector for damage or corrosion. If found, repair or replace as needed. Decision: Is wiring okay? (Yes/No)
- 22. If wiring is okay, use a multimeter to measure the voltage output of the fuel pressure sensor while the engine is running. You should see a voltage within 0.5 to 4.5 volts. Decision: Is voltage in range? (Yes/No)
- 33. If voltage is below specifications, replace the fuel pressure sensor. If voltage is normal, test the fuel system for pressure issues using a fuel pressure gauge. Decision: Is fuel pressure adequate? (Yes/No)
- 44. If fuel pressure is low, check fuel pump operation and filter condition. Replace or repair any faulty components.
Common causes
- Faulty fuel pressure sensor
- Wiring issues (shorts, breaks in the wire)
- Bad connector at the sensor
- Fuel pump issues
- Fuel filter blockage
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's best not to drive until the issue is resolved as it can lead to poor engine performance.
Will the code come back after resetting?
If the underlying issue isn't fixed, the code will likely return.
What happens if I just ignore it?
Ignoring it can cause further engine issues and affect fuel efficiency.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →