Engine Oil Temperature Sensor Fault
Indicates a fault with the engine oil temperature sensor.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
This code means the computer is not getting a correct reading from the oil temperature sensor, which may cause it to misjudge engine conditions.
What the computer is actually seeing
The ECU expects to see oil temperature readings between 180°F and 240°F (82°C to 116°C) under normal operating conditions. If the sensor is faulty, it might send a reading below 0°F (-18°C) or above 300°F (149°C).
What a healthy reading looks like
Normal oil temperature reads between 180°F and 240°F (82°C to 116°C).
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check the engine oil level; ensure it's within the proper range. Decision: If low, top off oil and recheck code; if okay, proceed.
- 22. Inspect wiring and connectors for damage, corrosion, or looseness. Decision: If issues found, repair any faults and recheck; if wires and connectors are okay, proceed.
- 33. Test the oil temperature sensor with a multimeter; look for a resistance between 5k ohm to 10k ohm at room temperature. Decision: If readings are off, replace sensor; if readings are within range, proceed.
- 44. Start the engine and monitor live data for oil temperature; it should rise steadily as the engine warms up. Decision: If temperature does not change, replace the oil temperature sensor; if it behaves normally, check for any pending codes.
Common causes
- Bad oil temperature sensor
- Wiring issues or short circuits
- Corroded or loose connectors
- Oil contamination or low oil level
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
Yes, but monitor oil levels and temperatures; address it soon to prevent engine damage.
Will this code come back after clearing?
It can if the underlying issue is not resolved; monitor the readings closely.
Why does this relate to other fault codes?
Fault codes can share the same circuit or sensor logic, leading to multiple codes for the same issue.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →