Intake Manifold Pressure Sensor Range/Performance Problem
The intake manifold pressure sensor is malfunctioning or out of its specified range.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The intake manifold pressure sensor measures how much air is in the engine's intake manifold. If it reads too high or too low, it signals a problem that can affect engine performance and efficiency.
What the computer is actually seeing
The engine control unit (ECU) is reading voltage from the sensor. A proper reading typically ranges from 0.5V to 4.5V. Values outside of this range indicate a potential issue.
What a healthy reading looks like
Intake manifold pressure should usually be between 5 to 20 inches of mercury (inHg) or approximately 0.1 to 0.5 bar when at idle and under load, depending on engine specifications.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check the wiring and connector of the intake manifold pressure sensor for damage or corrosion. Repair if needed. Decision Point: Is the wiring intact? If yes, proceed to step 2. If no, repair wiring and retest.
- 22. Check the intake manifold pressure sensor output using a multimeter while the engine is running. Expected voltage should be between 0.5V and 4.5V. Decision Point: Does it fall within this range? If yes, proceed to step 3. If no, replace the sensor.
- 33. Inspect for any vacuum leaks in the intake system. Use smoke testing if necessary. Decision Point: Are there any leaks? If yes, repair the leaks and retest. If no, assess the ECU for faults.
Common causes
- Faulty intake manifold pressure sensor
- Wiring issues like shorts or opens
- Vacuum leaks in the intake system
- Dirty or clogged air filters
- Faulty ECU or calibration issues
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's moderately severe, so it's best to fix it soon to avoid poor performance.
Will this code come back after a simple clear?
If the root issue isn't fixed, it will likely return.
Why do I see this code together with others?
This code often pairs with related sensor or performance codes due to shared circuits or faults.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →