Fuel Pressure Sensor Circuit Fault
This code indicates an issue with the fuel pressure sensor circuit.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The fuel pressure sensor is not sending the right electrical signals to the engine control unit (ECU). This could mean the sensor is bad or there's a wiring issue, which can lead to poor engine performance or starting problems.
What the computer is actually seeing
The ECU expects a voltage signal from the fuel pressure sensor that corresponds to the fuel rail pressure. Typically, a good sensor will show a voltage between 0.5V to 4.5V, depending on the pressure levels, with around 2.5V representing about 20 PSI on the fuel rail.
What a healthy reading looks like
The signal from the fuel pressure sensor should vary linearly with the fuel pressure, usually between 0.5V (5 PSI) to 4.5V (100 PSI).
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check the wiring and connectors for the fuel pressure sensor. Look for corrosion, loose connections, or physical damage. Decision: If found, repair and retest.
- 22. Measure the voltage at the fuel pressure sensor connector with the ignition on. Expected: Between 0.5V and 4.5V based on fuel pressure. Decision: If out of range, continue; if within range, replace the sensor.
- 33. If the voltage is out of spec, check for power at the sensor connector. Expected: 5V at the power terminal. Decision: If no power, trace back to the ECU; if power is present, replace the sensor.
Common causes
- Faulty fuel pressure sensor
- Open or shorted wiring to the sensor
- Corroded or loose connector
- Fuel pressure imbalance due to a failing pump
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's not recommended, as it can cause performance issues and potentially lead to more severe engine problems.
Will this code come back after resetting?
Yes, if the underlying issue isn’t fixed, the code will likely return.
Why does this code sometimes pair with low fuel pressure codes?
It’s common, as a failing fuel pump or fuel blockage can trigger both sensor and pressure-related codes.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →