Sensor Voltage Error
There's a problem with a sensor's voltage output.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The computer is getting incorrect voltage readings from a sensor, which can be due to faulty wiring or the sensor itself. For instance, the sensor is supposed to output around 0-5 volts, but it's either too low (like 0 volts) or too high (like 12 volts).
What the computer is actually seeing
The engine control module (ECM) is monitoring input from various sensors. If any sensor outputs a voltage that is outside the expected range, the ECM registers this as a fault, often indicating a malfunction or wiring issue.
What a healthy reading looks like
Typical voltage output from sensors is between 0-5 volts, however, it can vary depending on the application. Check specific sensor data reference for exact expected values.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect wiring and connectors related to the sensor for damage or corrosion. If you find issues, repair or replace as necessary.
- 22. Measure the voltage output of the sensor with a multimeter. If it's out of expected range (0-5 volts), proceed to next step.
- 33. Check the power supply to the sensor (if applicable). Make sure it's providing the correct voltage needed for operation. If power is good, consider replacing the sensor.
- 44. If the sensor is replaced or repaired, clear the fault code and take the vehicle for a test drive. Monitor for any reoccurrence of the fault code.
Common causes
- Faulty sensor
- Wiring issues (shorts, opens, corrosion)
- Bad connectors
- Incorrectly calibrated sensor
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
Yes, but it’s best to fix this soon to avoid further damage or performance issues.
Will this code come back after clearing it?
It can come back if the underlying issue isn't fixed, such as a faulty sensor or wiring issues.
Why does this code often pair with other SPNs?
Multiple sensors can be linked to the same circuit or system, leading to correlated faults.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →