Transmission Fluid Pressure Sensor Voltage High
The transmission fluid pressure sensor is reporting a high voltage signal.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The transmission fluid pressure sensor measures the pressure in the transmission fluid. If it's sending a voltage reading that’s too high, it means the sensor is detecting a pressure issue or is faulty. A common high voltage reading is over 4.5 volts when the expected should be closer to 0.5-4.5 volts under normal conditions.
What the computer is actually seeing
The computer expects the voltage from the transmission fluid pressure sensor to be between 0.5 and 4.5 volts. If it reads over 4.5 volts, an SPN 3719 code is triggered, indicating a potential fault in the pressure sensor or wiring.
What a healthy reading looks like
Normal voltage range for the transmission fluid pressure sensor is 0.5 to 4.5 volts, with about 1-2 volts indicating low pressure and 3-4 volts indicating high pressure.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. First, visually inspect the wiring and connectors for damage or corrosion. If damaged, repair or replace as necessary. Proceed to next step.
- 22. Check the transmission fluid level. It should be within the specified range. If low, top it off with the correct fluid. If fluid is contaminated, consider a fluid change. Proceed to next step.
- 33. Use a multimeter to measure the voltage at the transmission fluid pressure sensor connector while the engine is running. It should read between 0.5 to 4.5 volts. If it’s over 4.5 volts, the sensor is likely faulty. If it’s within range, there’s likely a wiring issue between the sensor and the ECM.
- 44. If the voltage is high (over 4.5 volts), replace the transmission fluid pressure sensor and clear the code. Retest to see if the code returns.
Common causes
- Faulty transmission fluid pressure sensor
- Wiring issue or short circuit in the sensor circuit
- Connector corrosion or damage at the sensor
- Transmission fluid level low or contaminated
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive the vehicle with SPN 3719?
It's not recommended to drive the vehicle long-term with this code as it may affect transmission function.
Will the code come back after clearing it?
If the issue persists (faulty sensor or wiring), the code is likely to return.
Why is SPN 3719 showing alongside other transmission codes?
Transmission codes can often trigger together due to shared components or systems, especially related to pressure.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →