AIR SYSTEM PRESSURE SENSOR OUT OF RANGE
The air system pressure sensor is reporting abnormal readings.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The pressure sensor in the air system is measuring pressures higher or lower than it should, disrupting how the system works.
What the computer is actually seeing
The engine control unit shows that the air pressure is outside of expected values, which can lead to reduced engine performance.
What a healthy reading looks like
Normal air pressure readings should be between 10 kPa to 200 kPa (approximately 1.5 psi to 29 psi), depending on altitude and engine load.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check the wiring and connectors for the air pressure sensor. Look for damage, corrosion or loose connections. If damaged, repair or replace.
- 22. Use a scan tool to read the actual pressure values from the air pressure sensor. Compare these values to expected levels (10 kPa to 200 kPa). If out of range, suspect a faulty sensor.
- 33. Inspect the air intake system for leaks or restrictions. Look for loose hoses or cracked ductwork. Repair as needed.
- 44. If the sensor readings are correct physically, but the code persists, test the sensor with a multimeter to ensure it operates properly. Replace if it fails.
Common causes
- Faulty air pressure sensor
- Wiring issues or connector problems
- Air leaks in the intake or boost system
- Blocked or restricted air intake
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's moderately severe; it's best to get it checked soon to avoid further issues.
Will this code come back after clearing?
If the underlying issue isn't fixed, yes, it will likely come back.
Why does this code pair with SPN 4118?
Both codes relate to performance issues in the air intake system, indicating potential sensor or system failures.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →