Cabin Temperature Sensor Voltage Above Threshold
The cabin temperature sensor voltage is higher than expected.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The cabin temperature sensor is sending a signal to the computer that indicates the temperature is higher than it really is. This can happen if the sensor is faulty or there’s an issue with the wiring.
What the computer is actually seeing
The engine or body control module is getting a voltage reading above 4.5 volts from the cabin temperature sensor when it should be under 4.5 volts, indicating an unrealistic high temperature.
What a healthy reading looks like
Expected voltage range for the cabin temperature sensor is typically between 0.5 to 4.5 volts. At 25°C (77°F), the output should be around 2.5 volts.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 1Check for damaged wiring or bad connectors on the cabin temperature sensor; repair or replace if necessary. Decision: is wiring intact? Yes/No?
- 2Using a multimeter, measure the voltage at the cabin temperature sensor. Expected: 0.5 to 4.5 volts. Decision: is voltage correct? Yes/No?
- 3If voltage is above 4.5 volts, replace the cabin temperature sensor. Decision: replace sensor, yes or no?
- 4After replacement, clear the fault code and monitor for a return. Decision: has the code returned? Yes/No?
Common causes
- Faulty cabin temperature sensor
- Wiring issues (shorts or open circuits)
- Corrosion at connector
- Calibration error in the control module
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
Yes, but the cabin temperature might not be accurately represented, leading to discomfort.
Will this code come back after repair?
If the underlying issue is fixed, it should not return.
Why does it sometimes pair with other codes?
Multiple codes often indicate related sensor issues or wiring problems affecting multiple components.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →