Brake Pressure Sensor 1
Indicates an issue with the brake pressure sensor reading.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The computer is not getting the right voltage reading from the brake pressure sensor, which tells it how hard the brakes are being applied.
What the computer is actually seeing
The brake pressure sensor should provide a voltage that changes with applied brake pressure, typically between 0.5V (no pressure) and 4.5V (maximum pressure).
What a healthy reading looks like
You should expect a voltage between 0.5V and 4.5V from the brake pressure sensor under normal operation.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 1Check wiring and connection to the brake pressure sensor for any damage or corrosion; repair if necessary.
- 2Measure the voltage output of the brake pressure sensor. It should vary from 0.5V to 4.5V based on brake pressure. If it is out of this range, consider replacing the sensor.
- 3Check the brake fluid level; it should be at the proper mark. If low, top it off and retest.
- 4If the fluid level is good, ensure there are no air bubbles in the brake line; bleeding the brakes may be necessary.
- 5If the sensor reads correctly and the fluid level is fine, check the ABS module for faults.
Common causes
- Faulty brake pressure sensor
- Wiring issue or bad connector
- Brake fluid level too low
- Air in the brake line
- Faulty ABS module
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code active?
It's best to fix it soon. The brakes may not work correctly, which can lead to safety issues.
Will this code come back after clearing?
If the underlying issue isn’t fixed, it will return after a drive cycle.
Why do I see this code with a transmission problem?
Brake pressure sensors can impact engine functions in automatic transmissions, causing related codes.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →