AIRSOL Control Module
Fault in the AIRSOL control module communication.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The AIRSOL control module, which manages air supply systems, is not communicating properly with other vehicle modules, possibly due to wiring issues or faults in the module itself.
What the computer is actually seeing
The engine's control unit (ECU) notices that it cannot receive or send data from the AIRSOL control module, triggering this fault. You might see inconsistent readings or none at all from related sensors.
What a healthy reading looks like
Expect the control module to respond within milliseconds, sending and receiving clear voltage signals (typically 5V logic levels) when functioning correctly.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Check the wiring and connectors to the AIRSOL module for damage, corrosion, or looseness. Repair or replace as necessary. Decision Point: Are wiring/connectors good? YES - proceed, NO - fix first.
Common causes
- Wiring issues such as damaged or frayed wires
- Corroded or loose connectors at the AIRSOL module
- Faulty AIRSOL control module itself
Typical repair cost
$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's moderate severity; drivability is impacted but you can drive to a shop.
Will this code come back after I clear it?
If the underlying issue isn't fixed, the code will likely return.
Why does this code pair with SPN 6260?
Both codes relate to issues with the air supply systems, often caused by similar faults.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →