Lost Communication with Vehicle Dynamics Module
There’s a communication failure with the vehicle dynamics module.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The vehicle's computer can't talk to the module that controls stability and traction functions, which can affect handling and safety.
What the computer is actually seeing
The main vehicle computer reports that it’s not receiving expected signals from the Vehicle Dynamics Module (VDM).
What a healthy reading looks like
The VDM should send a communication signal over the CAN bus with a voltage level around 2.5V to 12V when functioning.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring and connectors between the main ECU and the Vehicle Dynamics Module for any obvious damage or corrosion. Decision: If damaged, repair it; if not, proceed.
- 22. Check for DTCs in the ABS module, as issues there can affect VDM communication. Decision: If related codes are present, address those issues before continuing; if none, proceed.
- 33. Use a multimeter to check for voltage at the VDM connector when the ignition is in the ON position. Expected: 2.5V-12V. Decision: If voltage is within range, the VDM may be faulty; if not, further investigate the main ECU or the CAN bus wiring.
- 44. Perform a continuity check on the CAN bus lines between the ECU and VDM. Decision: If continuity is good, the VDM needs replacement; if not, repair the wiring.
Common causes
- Faulty or damaged wiring between the main computer and the VDM
- Corroded or loose connectors
- Failed Vehicle Dynamics Module (VDM)
- Faulty CAN bus communication
- Malfunctioning ABS module affecting VDM signals
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's not recommended. You may lose stability control or traction, which can be dangerous.
Will this code come back after clearing it?
If the underlying issue isn't fixed, the code will likely return.
Why is it paired with other codes?
Communication issues often affect multiple systems, so you may see related codes indicating problems in ABS or other modules.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →