Left Front Airbag Inactive
The left front airbag is signaling an inactive status.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The airbag system detected a problem with the left front airbag, meaning it may not deploy in a crash.
What the computer is actually seeing
The airbag module sees an open circuit or high resistance in the left front airbag circuit, typically above 5 ohms, indicating it can't activate the airbag correctly.
What a healthy reading looks like
The resistance in the airbag circuit should be less than 5 ohms. The voltage on the airbag harness should be close to battery voltage (12-14 volts) when the system is powered on.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the left front airbag harness for visible damage, wear, or disconnection.
- 2 - If damaged, repair or replace as necessary.
- 32. Check the airbag connector for corrosion or poor connection.
- 4 - If corroded, clean or replace the connector; if loose, secure it correctly.
- 53. Measure the resistance of the left front airbag circuit using a multimeter.
- 6 - If resistance is greater than 5 ohms, replace the airbag; if below, continue diagnostics.
- 74. Scan the airbag control module for codes and freeze frame data to check history.
- 8 - If other codes are present, address those issues before replacing parts.
Common causes
- Faulty left front airbag
- Damaged wiring or connector in the airbag circuit
- Faulty airbag control module
- Open circuit due to a disconnected connector
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It's advisable not to drive the vehicle until the airbag issue is resolved, as the airbag may not deploy in an accident.
Will this code come back after I fix it?
If the underlying issue is resolved, and connections are secure, the code should not return.
Why does this code appear together with others?
Airbag issues often involve multiple sensors, so several fault codes can appear due to a common wiring problem or a failure of the airbag control module.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →