Clutch Position Sensor A Circuit Range/Performance Problem
There's a range or performance issue with the clutch position sensor circuit.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The clutch position sensor tells the computer where the clutch pedal is. If the readings are off, it can't tell if you're trying to engage or disengage the clutch properly.
What the computer is actually seeing
The module expects the clutch position sensor to provide a voltage near 0V when the pedal is fully pressed and close to 5V when fully released. If the voltage is outside of the expected range, it triggers the P0819 code.
What a healthy reading looks like
Clutch position sensor should read between 0.5V (pedal full pressed) and 4.5V (pedal released).
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring and connectors related to the clutch position sensor for damage or corrosion. If damaged, repair or replace.
- 22. Check the clutch position sensor's voltage output with a multimeter while pressing and releasing the clutch pedal. It should range from 0.5V to 4.5V. If the readings are outside this range, replace the sensor.
- 33. Ensure the clutch pedal is properly adjusted according to manufacturer specifications. If misaligned, adjust it and recheck the sensor output.
- 44. If the sensor and wiring are good, verify the engine control module (ECM) functionality. If no faults are found, consider reprogramming or replacing the ECM.
Common causes
- Faulty clutch position sensor
- Damaged wiring or connectors
- Improperly adjusted clutch pedal
- Malfunctioning ECM (engine control module)
Typical repair cost
$$
Related codes
Frequently asked questions
Can I drive with this code?
It's drivable, but expect potential clutch engagement issues. Fix soon to avoid further complications.
Will the code come back after clearing?
If the underlying issue isn't fixed, the code will likely return.
Why does this code pair with related codes?
Related codes may indicate other faults in the clutch control system, hinting at broader issues.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →